Your own image - Printed Self Adhesive Sticker
Enhance the look of your motorhome, caravan, or boat with these fantastic printed panel stickers using your own photo.
IMPORTANT - Your file must be a bare minimum resolution of at least 300dpi. As a guide, If you zoom in on your image so that part of it appears at the size that you want it printed, then that will give you a guide as to how it will look. Pixelated images cannot be 'upgraded' to print better.
If you have copied a small image of the internet somewhere, chances are it will not be good enough. If unsure, send us the image via email first to check for you.
ALL PRINTS ARE LAMINATED AS STANDARD.
AI GENERATED IMAGES ARE NOT OF A HIGH ENOUGH DPI (YET) AND CANNOT BE REDRAWN TO A HIGH ENOUGH QUALITY. SEE FAQ FOR MORE INFO
IF THE SIZE YOU WANT IS SHOWING AS DISABLED - PLEASE CONTACT US
Enhance the look of your motorhome, caravan, or boat with these fantastic printed panel stickers.
IMPORTANT - Your file must be a bare minimum resolution of at least 300dpi. If you zoom in on your image so that it appears at the size that you want it printed, then that will give you a guide as to how it will look.
If you have copied a small image of the internet somewhere, chances are it will not be good enough. If unsure, send us the image via email first to check for you.
ALL PRINTS ARE LAMINATED AS STANDARD
| Condition | New |
|---|---|
| Manufacturer | Motorhome Stickers (Formerly Caravan Graphics) |
| Extended Description | Professional Grade - Comes sandwiched between a backing sheet and a application tape, Full fitting instructions will be provided, Weatherproof, Marine Safe after cured, Application Temperature Minimum 8 deg C, Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the adhesion of the material, Freshly lacquered or painted surfaces should be allowed to dry for at least three weeks and to completely cure respectively, The compatibility of selected lacquers and paints should be tested by the user, prior to application of the material. |