Hymer Swing Bonnet Sticker
This decal replicates the original bonnet graphic fitted to the Hymer Swing motorhome. It's a direct replacement for faded, cracked or missing originals, cut precisely to the factory shape and colourway: Golden Yellow, Navy, Mid Blue and Red.
What's in the pack: 1 set as shown, cut from 7–10 year rated polymeric vinyl. Printed graphics come laminated as standard for UV and abrasion protection. Each piece is sandwiched between a backing sheet and application tape, pre-spaced and ready to fit.
Dimensions: Approximately 450mm wide. If your bonnet has been resprayed or the original graphic was slightly different, send us a photo and we can adjust the size or recolour to match.
Fitting: Surface must be clean, dry and free of wax or polish — wipe down with isopropyl alcohol before applying. Minimum application temperature 8°C. Freshly painted surfaces need at least three weeks to cure before fitting. Full step-by-step instructions are included with every order.
Can't find your exact model? If your Hymer Swing has a different bonnet graphic or a colourway that doesn't match this listing, we can reproduce almost any decal from a clear photograph. Contact us for a quote.
| Condition | New |
|---|---|
| Manufacturer | Motorhome Stickers (Formerly Caravan Graphics) |
| Extended Description | Our cut vinyls are made from Premium, Marine Safe Vinyl, Polymeric vinyl rated for 7-10 Year. Actual lifespan depends on climate, UV exposure and other facors. Printed vinyls come laminated as standard for UV/abrasion protection. Comes sandwiched between a backing sheet and a application tape, Full fitting instructions will be provided. Weatherproof, Marine Safe after cured, Application Temperature Minimum 8 deg C, Surfaces to which the material will be applied must be thoroughly cleaned from dust, grease or any contamination which could affect the adhesion of the material. Freshly lacquered or painted surfaces should be allowed to dry for at least three weeks and to completely cure respectively, The compatibility of selected lacquers and paints should be tested by the user, prior to application of the material. |